P.O. Box 20051
Scranton, PA 18502 |
Email QuakerMaid
Regional Phone:
570.207.4432
Regional Fax:
570.207.4141 |
|
 |
 |
|
| TRADITIONAL |
WOOD SPECIES
Red birch, red oak, maple, cherry, knotty pine, or paint grade (maple). Other
species available with price quotation (ex. quarter sawn white oak, hickory,
mahogany etc.)
FRONT FRAMES
Solid 3/4" thick by 1 1/2" wide minimum.
Stiles and rails are joined by a mortise and tenon construction which is glued and
pinned to ensure squareness and maximum strength.
Frames are grooved to received ends and are glued and clamped to cabinet cases
until set.
DOORS & DRAWER FRONTS
Frames are solid lumber, 3/4" thick or thicker.
Frames are joined by either a mortise and tenon which is additionally glued and
pinned or a mitered construction which is doweled and glued for precision squareness.
Center panels vary in thickness and material depending on styling.
Stylings that require one piece construction may be 11/16" MDF (Medium Density
Fiberboard)
DRAWERS
5/8" solid maple, sides, front, and back with eased top edges on all members for a
furniture appearance. All are machined to receive the bottom.
Dovetail joint construction on all four corners.
3/8" birch veneer plywood bottoms.
DRAWER SUSPENSION
BLUM full extension, tandem under mounted (fully concealed)
Self adjusting , assuring proper alignment and operating very smoothly on 28 nylon
rollers.
Exceptionally easy removal and replacement of drawers.
100 lb. load bearing capacity at full extension
Some drawer accessories or unique cabinet depths may require different suspension
systems.
Upgrade - Blum full extension soft close glides.
SHELVES
3/4" thick plywood with natural birch veneer on two sides
Natural birch veneer front edge banding
Steel furniture pegs support shelves and adjust in a full interior height alignment in
1 1/4" (32mm.) increments.
3 mm peg holes are visually obscure
LOCK MITER CORNER - FINISHED ENDS
Unique 45 degree machining operation joining front frame and finished end.
Strongest and longest gluing surface possible.
Virtually invisible creating the illusion that the frame and finished end are one piece
of solid wood.
3/4" plywood with book matched veneer exterior and natural birch veneer interior.
WALL CABINET ENDS ARE 13" DEEP.
UNFINISHED ENDS
1/2" plywood with natural birch veneer on interior side.
WALL CABINET ENDS ARE 13" DEEP.
TOPS-FULL
1/2" plywood with natural birch veneer on interior side.
Mounted flush with the bottom of the top rails making all cabinetry fully sealed , and
the top drawers of all base cabinets become non- jamming regardless of contents.
BOTTOMS
1/2" plywood with natural birch veneer on interior and exterior sides.
Exterior of wall cabinet bottoms are finished to match the cabinetry.
Mounted flush with the top of the bottom rails.
BACKS-FULL
1/2" plywood with natural birch veneer on interior side.
Backs are fit into machine grooves in both ends and fastened to the top, bottom,
and ends.
Thickness of full back allows attachment to wall at any location desired.
TOE SPACES
3" deep by 4" high
matching, finished molding supplied.
Disclaimer
In our continuing search for the best and newest manufacturing techniques and materials,  reserves the right to change or alter specifications without notice.
|
|
